General Purpose Relays
Power Relays
SCHRACK
Power Relay 430 3mm
n 1
pole 16A, 1 form A (NO) contact
mains isolation
n Contact gap >3mm
n DC and AC coil
n 4kV/8mm coil-contact, reinforced insulation (VDE 0700)
n PCB mounting or quick connect terminals
n Mounting brackets or snap mounting
n Version with arc blow magnet for high DC loads
n Product in accordance to IEC 60335-1
n Safety
VZ
Typical applications
Domestic appliances, industrial appliances, industrial controls
Approvals
Coil Data
VDE REG.-Nr. C820, UL E214024
Coil voltage range
DC coil
AC coil
Operative range, IEC 61810
Technical data of approved types on request
Contact Data
Contact arrangement
1 form A (NO)
Contact gap
>3mm
Rated voltage
250VAC
Max. switching voltage
400VAC
Rated current
16A
Limiting making current, max 4 s, duty factor 10% 25A
Breaking capacity max.
4000VA
Contact material
AgCu3, AgCdO
Contact style
bifurcated contact
Frequency of operation, with/without load
900/18000h-1
Contact ratings
Type
Contact Load
IEC 61810
0430 .4 .. 0 A (NO) 16A, 250VAC, cosφ=1, 70°C
0430 .4 .. 1 A (NO) 16A, 250VAC, cosφ=1, 70°C
Mechanical endurance
DC coil
AC coil
F0256-B
Coil versions, DC coil
Coil
Rated
Operate
code
voltage
voltage
VDC
VDC
09
12
7.8
10
24
15.6
11
48
31.2
13
110
71.5
6 to 110VDC
6 to 240VAC
2
Release
voltage
VDC
0.6
1.2
2.4
5.5
Coil
resistance
Ω±10%
145
580
2200
13000
Rated coil
power
mW
993
993
1047
931
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Cycles
50x103
50x103
>250x103 operations
>250x103 operations
Coil versions, AC coil, 50Hz
Coil
Rated
Operate
code
voltage
voltage
VAC
VAC
23
24
18
25
60
45
26
110
83
27
230
175
28
240
185
Release
voltage
VAC
3.6
9
16
35
36
Coil
resistance
Ω±10%
145
950
3100
11400
13000
Rated coil
power
VA
1.8
1.8
1.8
1.8
1.8
All figures are given for coil without pre-energization, at ambient temperature +23°C, 50Hz.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between contact and coil
Material group of insulation parts
Tracking index of relay base
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
2000Vrms
4000Vrms
≥8/8mm
IIIa
PTI250
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
1
General Purpose Relays
Power Relays
SCHRACK
Power Relay 430 3mm (Continued)
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Resistance to heat and fire
according EN60335, par.30
Ambient temperature
-20 to +70°C
Category of environmental protection
IEC 61810
RTI - dust protected
Shock resistance (destructive)
100g
Terminal type
PCB-THT, quick connect
Mounting PCB, mounting brackets,
snap mounting, DIN rail
Weight
32g
Resistance to soldering heat THT
IEC 60068-2-20
270°C/10s
Packaging unit
50 pcs.
PCB layout / terminal assignment
Bottom view on solder pins
S0448-AE
S0448-AF
Dimensions
Snap mounting
PCB mounting
S0449-CB
S0449-CH
2
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
General Purpose Relays
Power Relays
SCHRACK
Power Relay 430 3mm (Continued)
Dimensions
Mounting brackets
DIN-rail mount
S0449-CK
S0449-AD
Product code structure
Typical product code 0430
Type
0430 Power relay 430 3mm
Mounting
0 PCB version
1 Mounting brackets
Contact design
4 Arc blowing magnet
5 Standard
Coil
Coil code: please refer to coil versions table
Contact material
0 AgCu 3
Version
100 Standard
2
5
Snap mounting
DIN-rail mounting
1
AgCdO
2
5
09
1
100
Other types on request
Product code
Mounting
Cont. material
Cont.arrangement
Coil
0430 25 0911 00
Snap mounting
AgCdO
1 form A
DC coil
0430 25 1011 00
1.0mm plate
1 NO contact
0430 25 2811 00
AC coil
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Part number
1-1415404-1
1-1415404-3
1-1415404-6
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
3
